Recent technologyIndia

Packaging for Dry Pet Food: Barrier, Pest Resistance and Recyclability

Packaging for dry pet food has to slow fat oxidation and moisture pick-up, keep stored-product insects out and, increasingly, be recyclable. Multilayer laminates give the strongest barrier; mono-material pouches recycle better but must prove their barrier on the filled product.[7]
PKDr Priya Krishnan
VP of Manufacturing Operations & Pilot Plant Solutions, Food Research Lab
✓ Technically reviewed by FRL Editorial · Last reviewed: 17 November 2026 · Next review: May 2027
Posted
17 November 2026

Last checked
17 November 2026

Reading time
10 min

Sources
12
At a glance
  • IS 11968:2019 asks for hermetically sealed, food-grade, tamper-evident, moisture-proof packs and pet food free from rancidity and insect infestation; certification is voluntary.[1]
  • FSSAI’s packaging and labelling regulations do not apply to pet food; IS 11968 marking and Legal Metrology declarations do.[2][3]
  • Insects enter through seal channels, valves and folds or chew through film, so the weakest point of the pack sets its pest resistance.[8][9]
  • Recyclable mono-material packs need at least 90% of one polymer and barriers below 5% of pack weight.[7]
  • From 2027–28, brand owners must use 20% recycled plastic in Category II flexible packaging (10% until then).[12]
  • No pack gives a fixed shelf life: validate the best-before date with stored, filled packs of your recipe.
Key numbers
<14%
Moisture content that defines dry pet food under IS 11968:2019 [1]
≥90%
Share of pack weight in one polymer for a recycling-friendly flexible pack [7]
<5%
Maximum EVOH or EVA barrier share of pack weight in a recyclable mono-material pack [7]
10% → 20%
Recycled-content target for Category II flexible plastic packaging, 2026–27 to 2027–28 [12]
12 months+
Shelf life pet foods are generally expected to reach [5]

What packaging for dry pet food must do

Kibble looks stable, but its fat oxidises, it picks up moisture from humid air and stored-product insects find their way into weak packs. The pack has to slow all three for the whole of the declared shelf life, survive rough handling in Indian distribution and still close properly once the customer opens it.

India’s pet food standard sets the baseline. IS 11968:2019 asks for dog and cat food to be packed in clean, sound, hermetically sealed, food-grade packages that show when they have been opened, are pilfer-proof and moisture-proof, and are sturdy enough for rough handling in transit. It also says pet food must be free from rancidity, musty odour, visible mould and insect infestation.[1] BIS certification to the standard is voluntary (the standard says products “may be certified”), but many brands use it as their specification.[1]

Labels follow two sets of rules. IS 11968:2019 lists the marks a pet food pack should carry: product name and type (complete or complementary), the animal it is for, manufacturer, net quantity, batch code, ingredients, calculated metabolisable energy, date of manufacture, best-before date and directions for use.[1] Retail packs must also carry the Legal Metrology (Packaged Commodities) Rules, 2011 declarations, such as net quantity, MRP and consumer-care details.[2] FSSAI’s labelling and packaging regulations do not apply to pet food as such, because the FSS Act defines food as food for human consumption and excludes animal feed.[3] Our guide to pet food regulations in India covers the full picture.

The pack also has a safety job. Extrusion kills Salmonella, but a finished product can be recontaminated during coating, cooling and filling, so clean filling and sealed packs are part of Salmonella control in dry pet food.[4]

The barrier: oxygen, moisture and aroma

Dry pet food is a fat-coated, low-moisture product: IS 11968:2019 defines dry pet food as having less than 14% moisture.[1] Its main enemies are oxygen, which drives fat oxidation and rancid odours, and water vapour, which softens texture and raises the risk of mould. Aroma matters too: when the volatile compounds that make kibble attractive escape or turn rancid, owners notice.

Storage studies show why the barrier matters. In extruded pet food made with rendered chicken by-product meal and no added preservative, trained panellists found rancid aroma rising from 0.33 to 4.21 on their scale over 12 months at ambient temperature, and pet owners’ overall liking fell from 5.52 to 4.95.[5] An earlier study found that lipid oxidation in stored extruded pet food depended mainly on how much the kibble expanded, so a more porous kibble exposes more fat to whatever oxygen the pack lets in.[6] Recipe, antioxidants and process set how sensitive the product is; the pack sets how much oxygen and moisture reach it.

Multilayer laminates explained

A multilayer laminate stacks films with different jobs: an outer layer for print and strength (often PET or BOPP), a barrier layer (aluminium foil, metallised film or a barrier polymer such as EVOH) and an inner heat-sealable layer (usually PE). It gives a strong barrier, but bonded layers of different materials are hard to recycle.[7] Barrier performance should be specified as measured oxygen and water vapour transmission rates from the converter, tested by standard methods at stated temperature and humidity, not by film thickness. Our guide to food packaging materials and shelf life in India explains how OTR and WVTR are measured and how barrier layers compare.

Comparison of a multilayer laminate pouch (outer print layer, foil or metallised barrier, heat-seal layer) with a mono-material pouch (single polymer family, thin barrier coating, same-polymer sealant)
Figure 1. Multilayer laminate versus mono-material pouch: what each layer does. Design logic after the India Plastics Pact guidance for films and flexible packaging [7].

Keeping pests out

Stored-product insects reach pet food in two ways. “Invaders” walk in through openings that already exist, such as seal channels, pinholes, vents and folds. “Penetrators” chew through the film itself.[8] Pest resistance therefore depends on the weakest point of the pack, not the strongest film.

  • Valves and vents are entry points. In laboratory tests, adults and larvae of the red-legged ham beetle (Necrobia rufipes), an emerging pest of stored pet food, entered pet food bags through the air-vent valves on the bottom of the bag.[9]
  • Older larvae chew through film. When polypropylene packs were challenged with Indian meal moth (Plodia interpunctella) at 28 °C and 65% relative humidity, third- and fifth-instar larvae penetrated all three pack types; the thickest pack resisted best.[8]
  • Seals and closures matter as much as film. Wide, continuous seals without channels, puncture-resistant films and tight closures reduce the openings invaders can use.[10]

Test for it rather than assume it: check seal integrity on production samples, and run a storage or insect challenge trial on filled packs under warm, humid conditions that match your warehouses and shops.

Recyclability and mono-material pouches

Recyclable pet food packaging is moving from mixed laminates to mono-material structures built from one polymer family. The India Plastics Pact’s design-for-recycling guidance for films and flexible packaging (December 2024) sets the main rules:[7]

  • The base polymer should make up at least 90% of the pack’s weight; the other 10% covers other polymers of the same family, barriers, inks, adhesives and additives.
  • EVOH or EVA barriers are acceptable if they stay below 5% of the pack’s weight. PET, PVC/PVDC, SiOx-coated PET and metallised PET barriers cause problems in recycling.
  • Vapour-deposited aluminium is considered recyclable, but thick aluminium foil is not, and manual sorters find it hard to tell them apart.
  • Mono-material PET film is possible, but India does not yet have enough recycling capacity for flexible PET.

Plastic packs also bring legal duties. Under the Plastic Waste Management Rules, a pet food brand owner registers for extended producer responsibility (EPR) and reports by category: Category II covers flexible plastic packaging of a single layer or of several different plastics, and Category III covers multilayer packaging with at least one plastic and one non-plastic layer, such as foil or paper.[11] The Plastic Waste Management (Amendment) Rules, 2026 (G.S.R. 237(E), 31 March 2026) set mandatory recycled-plastic content for brand owners:[12]

Category 2025–26 2026–27 2027–28 2028–29 onwards
I (rigid) 30% 40% 50% 60%
II (flexible plastic) 10% 10% 20% 20%
III (multilayer with a non-plastic layer) 5% 5% 10% 10%

For Category III, the target applies only to the weight of the plastic layers. The targets do not apply where a law, regulation or mandatory Indian Standard does not permit recycled plastic, and an unmet 2025–26 target for food-contact packaging can be carried forward for up to three years, with at least one third made up each year.[12] Because FSSAI’s food-contact rules do not cover pet food and IS 11968 is voluntary, check with your EPR adviser how these provisions apply to your pack before you claim an exemption.

The trade-off is barrier. A mono-PE or mono-PP pouch usually needs an EVOH layer, a coating or vapour-deposited metal to approach a laminate, and each option has to be proven on the filled pack. Make recyclability claims only after a design check against the guidance.

Formats: bags, pouches and resealability

Format decides cost, convenience and how well the barrier survives use. Large bags stay open in the home for weeks, so a closure that fails throws away the barrier the film was chosen for.

Format Strength Watch-point
Pillow or gusseted bag Low cost, familiar No reclosure; seal channels at gussets and folds
Stand-up resealable pouch Shelf presence, reclosable Zipper seal quality; zipper material for recycling
Block-bottom bag Stable, large pack sizes Corner and bottom seals; any air-vent valve
Rigid tub or jar Strong physical protection Weight, cost, lid seal; EPR Category I targets

Table 1. Common dry pet food pack formats.

Closures affect recycling too. The India Plastics Pact guidance prefers packs without closures, or closures made of the same material as the pack or easily separated from it, and advises against PVC, nylon, aluminium and PET closures on PE or PP packs.[7] Check the zipper or closure on filled packs after repeated opening, not only on empty film.

Matching packaging to shelf life

Shelf life comes from the whole system: recipe, process, pack and storage. Pet foods are generally expected to keep for 12 months or more,[5] but no pack gives a set number of months. A higher-fat or omega-3-rich recipe needs a stronger oxygen barrier or an oxygen-reduced headspace; a humid distribution chain needs a stronger moisture barrier. IS 11968:2019 requires a best-before date on every pack, so the date has to be supported by data.[1]

Validate on the real product. Store filled packs and measure moisture or water activity, oxidation markers such as peroxide value and volatile aldehydes, sensory change and, where relevant, acceptance by dogs or cats over time. Accelerated storage gives early signals; real-time data sets the final date. Our guide to real-time and accelerated shelf-life testing explains how to design the study.

Check How to test Pass signal
Barrier Converter OTR/WVTR data at stated conditions, then filled-pack storage Moisture and oxidation markers stay within your limits to the best-before date
Seals and closures Seal strength and integrity checks on production samples; repeated-opening test on zippers No leaks or channels; closure still seals
Pests Insect challenge or storage trial on filled packs No entry through seals, valves or film
Recycling Design check against the India Plastics Pact guidance and EPR category Structure meets the guidance; category and recycled-content duty identified
Label Review against IS 11968:2019 marking and Legal Metrology rules All required declarations present and legible

Table 2. Selection and validation checklist for dry pet food packs.

Where packaging fits in pet food development

Packaging is the last step in protecting what the recipe and process deliver. Our pillar guide to nutrient losses in pet food processing shows how extrusion, drying and storage reduce nutrients; the pack decides how much more is lost before the bowl. For the legal framework, start with pet food regulations in India. If you make chilled or raw products, our review of whether a raw food diet for dogs is safe covers the pathogen evidence, and the dog treat pilot batch worked example shows how pack trials fit into a first production run.

This article focuses on dry pet food. For barrier materials across human food categories, see food packaging materials for shelf life in India; for wet pet food and other heat-sterilised products, see retort pouch materials and our wet pet food development page.

For brands & formulators

Choose a pack in order: what the product needs, what distribution demands, what the label must carry and what your recycling and EPR obligations require. Then test two or three pack options on a pilot batch of your recipe rather than choosing from a datasheet.

Food Research Lab, based in Chennai, India, supports pet food product development from recipe to pilot batch, including kibble development, packaging trials and shelf-life planning. Storage, analytical and insect challenge testing is run or arranged through accredited partner laboratories, and pet acceptance trials are run or arranged through partner facilities. Our regulatory and scientific research team reviews labels and packaging claims for India and export markets.

What to do now
  • ✓Write a pack specification with OTR, WVTR (at stated conditions), seal strength and puncture resistance for every structure you consider.
  • ✓Map the weak points: seals, gussets, valves and zippers, and test filled packs for seal integrity and insect entry.
  • ✓Run a design-for-recycling check against the India Plastics Pact guidance and confirm your EPR category and recycled-content duty.
  • ✓Check the label against IS 11968:2019 marking and the Legal Metrology (Packaged Commodities) Rules.
  • ✓Validate the best-before date with a storage study on filled packs; see shelf-life testing.
Your next step
Test your pack on the real product
1Send your recipe, pack options, target shelf life and markets.
2We plan pilot filling, storage and seal, insect and shelf-life checks, run or arranged through accredited partner laboratories.
3Receive a pack recommendation with data you can take to your converter and label review.
Questions brands ask
What packaging is used for dry dog food?

Most dry dog food is sold in flexible laminate bags or pouches with a printable outer film, a barrier layer such as foil, metallised film or EVOH, and a heat-sealable inner layer. Mono-material polyethylene or polypropylene pouches are growing because they recycle more easily, but their barrier must be proven on the filled product.

Why does dry pet food need barrier packaging?

Kibble is coated with fat and sold dry, so oxygen causes rancid odours and loss of palatability, while water vapour softens texture and raises mould risk. A barrier pack slows both and holds in aroma. In one 12-month study, rancid aroma rose clearly in preservative-free kibble and owners liked it less.

How does packaging keep insects out of pet food?

Insects either walk in through existing gaps, such as seal channels, folds and air-vent valves, or chew through the film. Wide continuous seals, puncture-resistant films, tight closures and careful valve design reduce entry. An insect challenge or storage trial on filled packs shows whether the design works in warm, humid conditions.

Is dry pet food packaging recyclable in India?

Mixed laminates of PET, foil and PE are hard to recycle. Mono-material PE or PP pouches are more recyclable when at least 90% of the pack is one polymer and barriers stay below 5% of its weight. India has limited recycling capacity for flexible PET, so check design guidance before making claims.

What EPR rules apply to pet food packaging in India?

Pet food brand owners using plastic packs register for extended producer responsibility under the Plastic Waste Management Rules. Flexible all-plastic packs are Category II and foil or paper laminates Category III. The 2026 amendment requires recycled plastic in Category II packaging at 10% in 2026–27, rising to 20% from 2027–28.

What shelf life does packaged dry pet food have?

Pet foods are generally expected to keep for 12 months or more, but the real figure depends on fat level and type, antioxidants, kibble structure, pack barrier and storage climate. IS 11968:2019 requires a best-before date, so set it from a storage study on filled packs of your own recipe.

References
  1. Bureau of Indian Standards. (2019). IS 11968:2019 Pet food for dogs and cats: Specification (first revision). BIS record: BIS Know Your Standards; public copy: https://archive.org/details/gov.in.is.11968.2019 (cited for: dry pet food <14% moisture (cl. 3.7); free from rancidity and insect infestation (cl. 5.1); packing (cl. 6.1); marking (cl. 6.2.1); voluntary certification (cl. 6.2.2).)
  2. Department of Consumer Affairs, Government of India. (2011). Legal Metrology (Packaged Commodities) Rules, 2011, as amended. Copy hosted by the High Court of Tripura: thc.nic.in (cited for: Rule 6 declarations on retail packs.)
  3. Government of India. (2006). Food Safety and Standards Act, 2006, section 3(1)(j). https://www.fssai.gov.in/upload/uploadfiles/files/FOOD-ACT.pdf (cited for: definition of food excludes animal feed.)
  4. Dhakal, J., Cancio, L. P. M., Deliephan, A., Chaves, B. D., & Tubene, S. (2024). Salmonella presence and risk mitigation in pet foods: A growing challenge with implications for human health. Comprehensive Reviews in Food Science and Food Safety, 23(6), e70060. https://doi.org/10.1111/1541-4337.70060 (cited for: post-process recontamination and Salmonella control in pet food.)
  5. Chanadang, S., Koppel, K., & Aldrich, G. (2016). The impact of rendered protein meal oxidation level on shelf-life, sensory characteristics, and acceptability in extruded pet food. Animals, 6(8), 44. https://doi.org/10.3390/ani6080044 (cited for: expected shelf life of 12 months or more; rancid aroma 0.33–4.21 and overall liking 5.52–4.95 over 12 months.)
  6. Lin, S., Hsieh, F., & Huff, H. E. (1998). Effects of lipids and processing conditions on lipid oxidation of extruded dry pet food during storage. Animal Feed Science and Technology, 71(3–4), 283–294. https://doi.org/10.1016/S0377-8401(97)00157-0 (cited for: lipid oxidation in storage driven mainly by degree of extrudate expansion.)
  7. Confederation of Indian Industry / India Plastics Pact. (2024, December). Design for recycling guidance for films and flexible packaging. https://www.indiaplasticspact.org/uploads/Films-and-flexibles-design-guide.pdf (cited for: ≥90% base polymer; EVOH/EVA <5%; problem barriers; vapour-deposited aluminium vs foil; flexible PET capacity; closures.)
  8. Scheff, D. S., Sehgal, B., & Subramanyam, B. (2018). Evaluating penetration ability of Plodia interpunctella (Hübner) (Lepidoptera: Pyralidae) larvae into multilayer polypropylene packages. Insects, 9(2), 42. https://doi.org/10.3390/insects9020042 (cited for: invaders vs penetrators; larval penetration at 28 °C and 65% RH; thickest pack most resistant.)
  9. Savoldelli, S., Jucker, C., Peri, E., Arif, M. A., & Guarino, S. (2020). Necrobia rufipes (De Geer) infestation in pet food packaging and setup of a monitoring trap. Insects, 11(9), 623. https://doi.org/10.3390/insects11090623 (cited for: adults and larvae enter pet food bags through bottom air-vent valves.)
  10. Mullen, M. A., & Mowery, S. V. (2006). Insect-resistant packaging. In J. W. Heaps (Ed.), Insect management for food storage and processing (2nd ed.). AACC International. https://doi.org/10.1016/B978-1-891127-46-5.50011-8 (cited for: seals, closures and film resistance in insect-resistant packaging.)
  11. Ministry of Environment, Forest and Climate Change. (2022, February 16). Plastic Waste Management (Amendment) Rules, 2022 (G.S.R. 133(E)): Guidelines on extended producer responsibility for plastic packaging, Schedule II. Copy hosted by Tamil Nadu Pollution Control Board: tnpcb.gov.in (cited for: EPR registration and packaging categories I–III.)
  12. Ministry of Environment, Forest and Climate Change. (2026, March 31). Plastic Waste Management (Amendment) Rules, 2026 (G.S.R. 237(E)). The Gazette of India: Extraordinary, Part II, Section 3(i), CG-DL-E-31032026-271465. Gazette copy filed with NSE: https://nsearchives.nseindia.com/corporate/GANECOS_01042026102102_intimation_moef_notification.pdf (cited for: recycled-content table for brand owners; Category III plastic-weight rule; exemption; food-contact carry-forward.)
Continue the series · Part 4 of 5

Starting a pet food brand in India

1
Pet food regulations in India

What is mandatory and what is voluntary for a new dog treat brand.
2
Nutrient losses in pet food processingMAIN GUIDE

Raw, cooked and extruded compared, with taurine as the example.
3
Is a raw food diet for dogs safe?

Pathogen and nutrition evidence, and how brands lower the risk.
4
Packaging for dry pet foodYou are here

Barrier, pest resistance and recyclability for kibble and treats.
5
Dog treat pilot batch: a worked example

One treat from recipe to pilot lot, costing and scale-up.