What science can doIndia

Food Testing Before Launch: The NABL-Accredited Tests a New Food Plant in India Needs

Food testing before launch shows that a new product is safe, meets FSSAI standards and matches its label before it goes on sale. In India it also sets up a licence condition: testing for relevant contaminants at least once in six months in an own, NABL-accredited or FSSAI-notified laboratory.[1]
PKDr Priya Krishnan
VP of Manufacturing Operations & Pilot Plant Solutions, Food Research Lab
✓ Technically reviewed by FRL Editorial · Last reviewed: 16 November 2026 · Next review: May 2027
Posted
16 November 2026

Last checked
16 November 2026

Reading time
11 min

Sources
12
At a glance
  • FSSAI licence condition 12: test relevant chemical and microbiological contaminants at least once in six months, in an own, NABL-accredited or FSSAI-notified lab.[1]
  • NABL accredits labs to ISO/IEC 17025:2017 for a defined scope; FSSAI notification is regulatory recognition under the Act. Check scope per parameter.[2][3]
  • Build the panel from the product’s FSSAI category standard: composition, microbiology, contaminants, nutrition, shelf life and, where relevant, packaging migration.
  • Declared nutrients may fall at most 10% below the label value at any point in shelf life, so test nutrition at end of life too.[4]
  • Testing sits on the critical path for licence, label and first dispatch: budget time for retests.
Key numbers
Every 6 months
Minimum frequency of licence-condition contaminant testing [1]
ISO/IEC 17025:2017
Standard NABL uses to accredit testing laboratories [3]
−10%
Maximum shortfall vs declared nutrient value within shelf life [4]
₹503.47 crore
PMKSY allocation for 205 food testing laboratory projects, 169 completed (March 2025) [6]
70%
Satisfactory results in a 9-lab, 24-mycotoxin LC-MS/MS comparison [10]

Why food testing before launch matters

Testing turns a recipe and a process into evidence. In India it is also a licence condition: a licensed food business must test its products for the relevant chemical and microbiological contaminants, based on its own history and risk assessment, at least once in six months, in its own laboratory or in a NABL-accredited or FSSAI-notified laboratory.[1] Since a FSSAI order of 13 January 2023, manufacturers, repackers and relabellers upload those six-monthly reports on FoSCoS or link them from FSSAI’s laboratory network.[5]

Testing starts before the licence is granted. The licence application list in the FSSAI licensing regulations includes a chemical and bacteriological analysis report for water used as an ingredient, from a recognised or public health laboratory, and a recall plan where applicable.[1] The licence route itself is covered in our companion article on licences for a food processing plant.

Food testing before launch therefore has three jobs: show that the product meets FSSAI standards and limits, prove that the label is true for the whole shelf life, and give the plant a baseline it can compare every later batch against. Without that data a new plant ends up holding stock, relabelling or, in the worst case, recalling. Our guide to what a food recall costs shows how quickly that bill grows.

Choosing a NABL-accredited or FSSAI-notified laboratory

The Food Safety and Standards Act, 2006 lets FSSAI notify food laboratories accredited by NABL (the National Accreditation Board for Testing and Calibration Laboratories) or another accreditation agency to analyse samples taken under the Act.[2] NABL assesses testing laboratories against ISO/IEC 17025:2017, the international standard for the competence of testing and calibration laboratories.[3]

NABL accreditation vs FSSAI notification

NABL accreditation is a statement of technical competence for a defined scope of tests. FSSAI notification is a regulatory status: the laboratory is recognised for analysis under the Act. A laboratory can hold both. For the licence-condition testing above, either route is accepted.[1] For development work, any competent laboratory can generate useful data, but results you will rely on for a label, a licence file or a buyer should come from an accredited scope.

Check five things for every parameter on your panel:

  • Scope: the parameter and the matrix (for example, aflatoxin in groundnut paste) appear in the laboratory’s accreditation scope, not just on the certificate.
  • Method and limit of quantification: the method can measure well below the limit you must prove.
  • Measurement uncertainty: the report states it, so a result close to a limit can be judged.
  • Proficiency testing: the laboratory takes part in schemes for the parameters you need.
  • Sampling and turnaround: sampling, transport and chain of custody are agreed, and the turnaround fits the launch date.

Capacity is growing. In March 2025 the Ministry of Food Processing Industries (MoFPI) said it would support 100 new NABL-accredited food testing laboratories in 2025–26, and that PMKSY had allocated ₹503.47 crore to 205 laboratory projects, 169 of them completed.[6] MoFPI issued revised guidelines for new NABL-accredited food testing laboratories under the PMKSY food safety and quality assurance infrastructure component on 12 November 2025.[7] Scope, turnaround and distance still differ between laboratories, so choose by parameter, not by name.

Microbiological and pathogen testing

Microbiological testing covers hygiene indicators (such as total plate count, yeast and mould, Enterobacteriaceae or coliforms) and the pathogens that matter for the product, for example Salmonella, Listeria monocytogenes or Bacillus cereus. FSSAI’s product standards set microbiological requirements for many categories, so start the panel from the standard for your category.[8]

Pathogen results depend on method and analyst. In five consecutive proficiency tests run by Germany’s national reference laboratory for L. monocytogenes, official control laboratories reported flawless results in 93.4% of cases across 91 participations, and only four times did a participant fail at the first attempt.[9] That is a good result, and it is also the reason to ask any laboratory for its own proficiency record.

Plan sampling on pilot and first production batches, hold retained samples under defined conditions, and repeat the panel during shelf-life studies. Add environmental swabs of the line, because the line, not only the recipe, decides the result.

Chemical contaminants: metals, pesticide residues and mycotoxins

FSSAI’s contaminants, toxins and residues regulations set limits for toxic metals, pesticide residues and mycotoxins in named foods.[8] Contaminants usually arrive with raw materials, so test incoming lots of high-risk ingredients (spices, cereals, nuts, oils) as well as the finished product, and write the limits into supplier specifications. Our article on ethylene oxide in spice certificates of analysis shows what happens when a supplier’s certificate is trusted without verification.

Contaminant methods are demanding. In an interlaboratory comparison of 24 regulated and emerging mycotoxins by LC-MS/MS, nine laboratories tested ten lots of four feed and food commodities; 70% of results across all compounds fell within the satisfactory z-score range of ±2.[10] Ask for the validated method, the limit of quantification for each analyte and recent proficiency results before you commit a panel.

Nutrition and label verification

Under the FSS (Labelling and Display) Regulations, 2020, a pre-packaged food label gives energy, protein, carbohydrate, total and added sugars, total fat, saturated and trans fat, cholesterol and sodium per 100 g or 100 ml (or per single-serve pack), with per-serve percentage contribution to the daily reference values.[4] The same regulation says the declared nutrients must comply with a tolerance of at most minus 10% of the declared value at any point within the declared shelf life.[4] Check the current consolidated text for later amendments before you sign off.

That tolerance turns nutrition analysis into a shelf-life question. Proximate analysis (moisture, protein, fat, ash, with carbohydrate by difference and energy calculated) on production-representative samples sets the panel; repeat tests at the end of shelf life show whether vitamins or other declared nutrients hold. Label verification then compares every number and claim with the data, and checks the allergen declaration against the recipe and the line.

Label errors are a leading recall cause. In 1,415 US recalls for major food allergens (FY 2013–2019), labelling-associated errors accounted for 71.1% of those with a known root cause.[11] For a worked example, see our analysis of undeclared allergen recalls. Products that need FSSAI approval before launch are covered in our guide to FSSAI product approval, and nutraceuticals in our guide to FSSAI nutraceutical regulations.

A pre-launch testing panel for a new food product

Table 1 is a starting panel. The exact parameters depend on the product category standard, the raw materials, the process and the claims.

Table 1. A pre-launch testing panel for a new food product

Test family What it answers When
Identity and composition Is the product what the specification says? Pilot and validation batches
Microbiology and pathogens Is it safe and hygienic? Validation, shelf life, routine
Metals, pesticide residues, mycotoxins Do contaminants meet FSSAI limits?[8] Raw materials and finished product
Proximate and nutrition Does the label panel match the product through shelf life?[4] Before label sign-off, end of shelf life
Shelf life How long is it safe and acceptable? Pilot study, then production
Packaging migration Does the pack transfer anything unsafe? Where the pack or process requires
Water used as an ingredient Is it potable?[1] Before the licence application, then routine

Shelf-life and stability testing

Shelf-life testing stores the product in its final pack under defined conditions and tests it at set time points for microbiology, sensory quality and key chemistry. The results set the date mark and, because of the nutrient tolerance, the nutrition panel too.[4]

Before the study starts, fix the pack, storage conditions, time points and acceptance criteria: for example microbial limits, moisture, an oxidation marker for fat-containing foods and a minimum sensory score. The first failed criterion sets the end of life. If the recipe, pack or process changes, the study restarts, so freeze them before the validation round.

A study cannot be compressed beyond what the data support. Accelerated conditions give early signals, but real-time data support the final date. Our article on real-time vs accelerated shelf-life testing covers methods and timelines, and our guide to packaging materials for shelf life in India covers barrier choice. Link results with sensory research so that end-of-life acceptability is measured as well as safety.

Four-stage food testing roadmap: recipe and pilot (proximate analysis, shelf-life study design); pre-production validation (microbiology and pathogens, heavy metals and pesticide residue, packaging migration); launch release (label verification, reports from a NABL or FSSAI-notified lab); after launch (shelf-life results, routine monitoring)
Figure 1. Testing roadmap from recipe to routine monitoring. Source: FRL, based on [1] and [4].

Building food testing before launch into your plan

Put the panel in the project plan and the budget: parameters, laboratory, sampling plan, turnaround and the date each result is needed. The licence file, label artwork and first dispatch all wait for data, so testing sits on the critical path. Reserve time and budget for retests.

  1. Recipe and pilot: proximate analysis, first microbiology, shelf-life study design.
  2. Pre-production validation: microbiology and pathogens, contaminants, packaging migration where relevant.
  3. Launch release: label verification and reports from a NABL-accredited or FSSAI-notified laboratory, as required.
  4. After launch: shelf-life results at end of date, six-monthly licence-condition testing and routine monitoring.[1]

Keep the records. The recall regulations require distribution records (supplier and customer, lot, batch, dates) to be kept for one year beyond the best-before or expiry date, and test reports tied to batch codes are what let a plant narrow a recall to the affected lots.[12] For how stages and lead times fit together, see our food product development timeline, our worked recipe scale-up from kitchen to pilot plant and, for shelf-stable pouches and cans, our pilot retort trials.

Where food testing fits in setting up a food plant in India

This guide is the science hub of FRL’s India food plant series. Each decision has a companion piece:

For India market support see our India page, and for licence filing see our FSSAI food and beverage registration support.

Conclusion

Food testing before launch is part of plant design, not a late purchase. Start the panel from your category standard, choose laboratories by accredited scope for each parameter, test raw materials as well as product, verify the label against data that hold for the whole shelf life, and keep results tied to batch codes. Done that way, the same data support the licence, the label and the six-monthly testing that follows.

For brands & formulators

Food Research Lab works from Chennai, India, with food entrepreneurs and manufacturers setting up or expanding plants. Our techno-economic feasibility study covers raw material costing, machinery, processing costs, profit and loss, pricing, packaging and nutrition labelling, and its product development phase includes microbiology, shelf-life study and nutritional evaluation as per the regulations and guidelines. We plan the pre-launch panel with you and run or arrange the testing through accredited partner laboratories.

See also our new food product development service, regulatory and scientific research for label and licence files, and sensory research and analytics for shelf-life acceptability. You can also contact us with your product list and launch date.

What to do now
  • ✓Start from your category standard and list every parameter the product, raw materials and claims require.
  • ✓Shortlist laboratories by scope: check accreditation scope, method, limit of quantification and turnaround for each parameter.
  • ✓Design the shelf-life study during pilot work, with nutrition tested at end of life to meet the label tolerance.
  • ✓Tie every report to a batch code and set up six-monthly testing and FoSCoS upload from the first licence half-year.
  • ✓Put testing in the project budget through a techno-economic feasibility study.
Your next step
Plan your pre-launch testing
1Send your product list, category and target launch date.
2We build the testing panel, shelf-life plan and budget, with testing run or arranged through accredited partner laboratories.
3Receive a panel, timeline and cost line you can carry into your feasibility study and licence file.
Questions brands ask
What is food testing before launch?

Food testing before launch is the set of laboratory tests that show a new product is safe, meets FSSAI standards and matches its label before it goes on sale. It usually covers composition, microbiology, contaminants, nutrition and shelf life, and it gives the plant a baseline for the six-monthly testing that the licence requires.

What is NABL accreditation?

NABL accreditation shows that a testing laboratory meets ISO/IEC 17025:2017 for a defined scope of tests. It covers named parameters in named food matrices, not the laboratory as a whole. Before you use a result for a label or licence file, check that the parameter and matrix you need appear in the laboratory’s accreditation scope.

What is the difference between NABL and FSSAI-notified labs?

NABL accreditation is a statement of technical competence against ISO/IEC 17025. FSSAI notification is regulatory recognition of a laboratory for analysis under the Food Safety and Standards Act, 2006. A laboratory can hold both. For the six-monthly licence-condition testing, FSSAI accepts results from the business’s own laboratory or from a NABL-accredited or FSSAI-notified laboratory.

How often must a licensed food business test its products?

The FSSAI licence conditions require testing of relevant chemical and microbiological contaminants as often as the business’s own history and risk assessment require, and at least once in six months. Since January 2023, manufacturers, repackers and relabellers upload these six-monthly reports on FoSCoS or link them from FSSAI’s laboratory network.

Which tests does a new food product need before launch?

Most products need identity and composition, microbiology and relevant pathogens, contaminants such as metals, pesticide residues and mycotoxins, proximate and nutrition analysis for the label, and a shelf-life study. Packaging migration and water analysis are added where they apply. The exact panel follows the FSSAI standard for the product category and the claims made.

How accurate must the nutrition label be?

The FSS (Labelling and Display) Regulations, 2020 set a tolerance of at most minus 10% of the declared value for each declared nutrient at any point within the shelf life. That means nutrition testing should be repeated at the end of shelf life, not only on fresh product, especially for vitamins and other nutrients that degrade.

References
  1. Food Safety and Standards Authority of India. (2017). Food Safety and Standards (Licensing and Registration of Food Businesses) Regulations, 2011 (compendium, version II, 9 November 2017): Schedule 2, Annexure 2 (documents for a licence application, items 8 and 17) and conditions of licence (condition 12). https://fssai.gov.in/upload/uploadfiles/files/Compendium_Licensing_Regulations.pdf (cited for six-monthly testing in own, NABL-accredited or FSSAI-notified laboratories; water analysis report and recall plan in the licence document list)
  2. Government of India. (2006). Food Safety and Standards Act, 2006 (Act 34 of 2006), section 43. https://fssai.gov.in/upload/uploadfiles/files/FOOD-ACT.pdf (cited for FSSAI notification of NABL-accredited laboratories)
  3. National Accreditation Board for Testing and Calibration Laboratories. (n.d.). NABL [home page; accreditation and training under ISO/IEC 17025:2017]. https://nabl-india.org/ (cited for ISO/IEC 17025:2017 as the basis of testing-laboratory accreditation)
  4. Food Safety and Standards Authority of India. (2020). Food Safety and Standards (Labelling and Display) Regulations, 2020 (notification F. No. 1-94/FSSAI/SP(Labelling)/2014(Pt-2), 17 November 2020), regulation 5(3). https://stg-old.fssai.gov.in/upload/notifications/2020/12/5fd87c6a0f6adGazette_Notification_Labelling_Display_14_12_2020.pdf (cited for nutrition declaration content and the minus 10% tolerance within shelf life)
  5. Food Safety and Standards Authority of India. (2023). Monthly achievements, January 2023 (item 4: order dated 13.01.2023 on uploading six-monthly laboratory test reports through FoSCoS). https://stg-old.fssai.gov.in/upload/monthly_update/2023/05/645b48b02123dmonthly%20achievements%20Jan%202023.pdf (cited for the FoSCoS upload requirement)
  6. Press Information Bureau, Ministry of Food Processing Industries. (2025, March 22). 100 new food testing labs to be established with financial support from Ministry of Food Processing Industries, announces Ravneet Singh Bittu. https://pib.gov.in/PressReleasePage.aspx?PRID=2114057 (cited for 100 new NABL-accredited labs in 2025–26; ₹503.47 crore for 205 projects, 169 completed)
  7. Ministry of Food Processing Industries. (2025). New scheme guidelines dated 12.11.2025 for setting up food testing laboratories with NABL accreditation (PMKSY, Food Safety and Quality Assurance Infrastructure). https://www.foodtechbiz.com/business-updates/mofpi-invites-proposals-for-establishing-nabl-accredited-food-testing-laboratories-under-pmksy (cited for the date and scope of the revised guidelines)
  8. Food Safety and Standards Authority of India. (n.d.). Food Safety and Standards regulations [index of regulations, including Food Products Standards and Food Additives, and Contaminants, Toxins and Residues]. https://fssai.gov.in/food-law/regulations (cited for category standards, microbiological requirements and contaminant limits)
  9. Ufermann, C. M., Adler, M., Lüth, S., Al Dahouk, S., & Kleta, S. (2025). Retrospective analysis of the results of five consecutive proficiency tests organized by the German National Reference Laboratory for Listeria monocytogenes. Foodborne Pathogens and Disease, 22(12), 883–892. https://doi.org/10.1089/fpd.2024.0156 (cited for 91 participations, 93.4% flawless results)
  10. Steiner, D., Humpel, A., Stamminger, E., Schoeberl, A., Pachschwoell, G., Sloboda, A., … Malachová, A. (2022). An interlaboratory comparison study of regulated and emerging mycotoxins using liquid chromatography mass spectrometry: Challenges and future directions of routine multi-mycotoxin analysis including emerging mycotoxins. Toxins, 14(6), 405. https://doi.org/10.3390/toxins14060405 (cited for nine labs, 24 mycotoxins, 70% satisfactory z-scores)
  11. Sharma, G. M., Ma, Y., & Luccioli, S. (2023). Recalls associated with food allergens and gluten in FDA-regulated foods from fiscal years 2013 to 2019. Journal of Food Protection, 86(4), 100069. https://doi.org/10.1016/j.jfp.2023.100069 (cited for 1,415 allergen recalls; labelling errors 71.1% of those with known root cause)
  12. Food Safety and Standards Authority of India. (2017). Food Safety and Standards (Food Recall Procedure) Regulations, 2017 (Gazette of India, Extraordinary, Part III, Section 4, 20 January 2017), regulation 6(1). https://fssai.gov.in/upload/uploadfiles/files/Food_Recall_Regulations.pdf (cited for distribution-record retention)
Continue the series · Part 3 of 5

Setting up a food plant in India

1
Food processing industry in India in 2026

PLISFPI, PMKSY and where capacity is being added.
2
FSSAI central licence for a food processing plant

The licence, factory and pollution approvals a new plant needs.
3
Food testing before launchYou are hereMAIN GUIDE

What to test before a new product reaches the market.
4
How much does a food recall cost?

The direct and indirect costs a launch can carry.
5
Food plant feasibility study in India

A techno-economic worked example.