Testing turns a recipe and a process into evidence. In India it is also a licence condition: a licensed food business must test its products for the relevant chemical and microbiological contaminants, based on its own history and risk assessment, at least once in six months, in its own laboratory or in a NABL-accredited or FSSAI-notified laboratory.[1] Since a FSSAI order of 13 January 2023, manufacturers, repackers and relabellers upload those six-monthly reports on FoSCoS or link them from FSSAI’s laboratory network.[5]
Testing starts before the licence is granted. The licence application list in the FSSAI licensing regulations includes a chemical and bacteriological analysis report for water used as an ingredient, from a recognised or public health laboratory, and a recall plan where applicable.[1] The licence route itself is covered in our companion article on licences for a food processing plant.
Food testing before launch therefore has three jobs: show that the product meets FSSAI standards and limits, prove that the label is true for the whole shelf life, and give the plant a baseline it can compare every later batch against. Without that data a new plant ends up holding stock, relabelling or, in the worst case, recalling. Our guide to what a food recall costs shows how quickly that bill grows.
The Food Safety and Standards Act, 2006 lets FSSAI notify food laboratories accredited by NABL (the National Accreditation Board for Testing and Calibration Laboratories) or another accreditation agency to analyse samples taken under the Act.[2] NABL assesses testing laboratories against ISO/IEC 17025:2017, the international standard for the competence of testing and calibration laboratories.[3]
NABL accreditation is a statement of technical competence for a defined scope of tests. FSSAI notification is a regulatory status: the laboratory is recognised for analysis under the Act. A laboratory can hold both. For the licence-condition testing above, either route is accepted.[1] For development work, any competent laboratory can generate useful data, but results you will rely on for a label, a licence file or a buyer should come from an accredited scope.
Check five things for every parameter on your panel:
Capacity is growing. In March 2025 the Ministry of Food Processing Industries (MoFPI) said it would support 100 new NABL-accredited food testing laboratories in 2025–26, and that PMKSY had allocated ₹503.47 crore to 205 laboratory projects, 169 of them completed.[6] MoFPI issued revised guidelines for new NABL-accredited food testing laboratories under the PMKSY food safety and quality assurance infrastructure component on 12 November 2025.[7] Scope, turnaround and distance still differ between laboratories, so choose by parameter, not by name.
Microbiological testing covers hygiene indicators (such as total plate count, yeast and mould, Enterobacteriaceae or coliforms) and the pathogens that matter for the product, for example Salmonella, Listeria monocytogenes or Bacillus cereus. FSSAI’s product standards set microbiological requirements for many categories, so start the panel from the standard for your category.[8]
Pathogen results depend on method and analyst. In five consecutive proficiency tests run by Germany’s national reference laboratory for L. monocytogenes, official control laboratories reported flawless results in 93.4% of cases across 91 participations, and only four times did a participant fail at the first attempt.[9] That is a good result, and it is also the reason to ask any laboratory for its own proficiency record.
Plan sampling on pilot and first production batches, hold retained samples under defined conditions, and repeat the panel during shelf-life studies. Add environmental swabs of the line, because the line, not only the recipe, decides the result.
FSSAI’s contaminants, toxins and residues regulations set limits for toxic metals, pesticide residues and mycotoxins in named foods.[8] Contaminants usually arrive with raw materials, so test incoming lots of high-risk ingredients (spices, cereals, nuts, oils) as well as the finished product, and write the limits into supplier specifications. Our article on ethylene oxide in spice certificates of analysis shows what happens when a supplier’s certificate is trusted without verification.
Contaminant methods are demanding. In an interlaboratory comparison of 24 regulated and emerging mycotoxins by LC-MS/MS, nine laboratories tested ten lots of four feed and food commodities; 70% of results across all compounds fell within the satisfactory z-score range of ±2.[10] Ask for the validated method, the limit of quantification for each analyte and recent proficiency results before you commit a panel.
Under the FSS (Labelling and Display) Regulations, 2020, a pre-packaged food label gives energy, protein, carbohydrate, total and added sugars, total fat, saturated and trans fat, cholesterol and sodium per 100 g or 100 ml (or per single-serve pack), with per-serve percentage contribution to the daily reference values.[4] The same regulation says the declared nutrients must comply with a tolerance of at most minus 10% of the declared value at any point within the declared shelf life.[4] Check the current consolidated text for later amendments before you sign off.
That tolerance turns nutrition analysis into a shelf-life question. Proximate analysis (moisture, protein, fat, ash, with carbohydrate by difference and energy calculated) on production-representative samples sets the panel; repeat tests at the end of shelf life show whether vitamins or other declared nutrients hold. Label verification then compares every number and claim with the data, and checks the allergen declaration against the recipe and the line.
Label errors are a leading recall cause. In 1,415 US recalls for major food allergens (FY 2013–2019), labelling-associated errors accounted for 71.1% of those with a known root cause.[11] For a worked example, see our analysis of undeclared allergen recalls. Products that need FSSAI approval before launch are covered in our guide to FSSAI product approval, and nutraceuticals in our guide to FSSAI nutraceutical regulations.
Table 1 is a starting panel. The exact parameters depend on the product category standard, the raw materials, the process and the claims.
Table 1. A pre-launch testing panel for a new food product
| Test family | What it answers | When |
|---|---|---|
| Identity and composition | Is the product what the specification says? | Pilot and validation batches |
| Microbiology and pathogens | Is it safe and hygienic? | Validation, shelf life, routine |
| Metals, pesticide residues, mycotoxins | Do contaminants meet FSSAI limits?[8] | Raw materials and finished product |
| Proximate and nutrition | Does the label panel match the product through shelf life?[4] | Before label sign-off, end of shelf life |
| Shelf life | How long is it safe and acceptable? | Pilot study, then production |
| Packaging migration | Does the pack transfer anything unsafe? | Where the pack or process requires |
| Water used as an ingredient | Is it potable?[1] | Before the licence application, then routine |
Shelf-life testing stores the product in its final pack under defined conditions and tests it at set time points for microbiology, sensory quality and key chemistry. The results set the date mark and, because of the nutrient tolerance, the nutrition panel too.[4]
Before the study starts, fix the pack, storage conditions, time points and acceptance criteria: for example microbial limits, moisture, an oxidation marker for fat-containing foods and a minimum sensory score. The first failed criterion sets the end of life. If the recipe, pack or process changes, the study restarts, so freeze them before the validation round.
A study cannot be compressed beyond what the data support. Accelerated conditions give early signals, but real-time data support the final date. Our article on real-time vs accelerated shelf-life testing covers methods and timelines, and our guide to packaging materials for shelf life in India covers barrier choice. Link results with sensory research so that end-of-life acceptability is measured as well as safety.
Put the panel in the project plan and the budget: parameters, laboratory, sampling plan, turnaround and the date each result is needed. The licence file, label artwork and first dispatch all wait for data, so testing sits on the critical path. Reserve time and budget for retests.
Keep the records. The recall regulations require distribution records (supplier and customer, lot, batch, dates) to be kept for one year beyond the best-before or expiry date, and test reports tied to batch codes are what let a plant narrow a recall to the affected lots.[12] For how stages and lead times fit together, see our food product development timeline, our worked recipe scale-up from kitchen to pilot plant and, for shelf-stable pouches and cans, our pilot retort trials.
This guide is the science hub of FRL’s India food plant series. Each decision has a companion piece:
For India market support see our India page, and for licence filing see our FSSAI food and beverage registration support.
Food testing before launch is part of plant design, not a late purchase. Start the panel from your category standard, choose laboratories by accredited scope for each parameter, test raw materials as well as product, verify the label against data that hold for the whole shelf life, and keep results tied to batch codes. Done that way, the same data support the licence, the label and the six-monthly testing that follows.
Food Research Lab works from Chennai, India, with food entrepreneurs and manufacturers setting up or expanding plants. Our techno-economic feasibility study covers raw material costing, machinery, processing costs, profit and loss, pricing, packaging and nutrition labelling, and its product development phase includes microbiology, shelf-life study and nutritional evaluation as per the regulations and guidelines. We plan the pre-launch panel with you and run or arrange the testing through accredited partner laboratories.
See also our new food product development service, regulatory and scientific research for label and licence files, and sensory research and analytics for shelf-life acceptability. You can also contact us with your product list and launch date.
Food testing before launch is the set of laboratory tests that show a new product is safe, meets FSSAI standards and matches its label before it goes on sale. It usually covers composition, microbiology, contaminants, nutrition and shelf life, and it gives the plant a baseline for the six-monthly testing that the licence requires.
NABL accreditation shows that a testing laboratory meets ISO/IEC 17025:2017 for a defined scope of tests. It covers named parameters in named food matrices, not the laboratory as a whole. Before you use a result for a label or licence file, check that the parameter and matrix you need appear in the laboratory’s accreditation scope.
NABL accreditation is a statement of technical competence against ISO/IEC 17025. FSSAI notification is regulatory recognition of a laboratory for analysis under the Food Safety and Standards Act, 2006. A laboratory can hold both. For the six-monthly licence-condition testing, FSSAI accepts results from the business’s own laboratory or from a NABL-accredited or FSSAI-notified laboratory.
The FSSAI licence conditions require testing of relevant chemical and microbiological contaminants as often as the business’s own history and risk assessment require, and at least once in six months. Since January 2023, manufacturers, repackers and relabellers upload these six-monthly reports on FoSCoS or link them from FSSAI’s laboratory network.
Most products need identity and composition, microbiology and relevant pathogens, contaminants such as metals, pesticide residues and mycotoxins, proximate and nutrition analysis for the label, and a shelf-life study. Packaging migration and water analysis are added where they apply. The exact panel follows the FSSAI standard for the product category and the claims made.
The FSS (Labelling and Display) Regulations, 2020 set a tolerance of at most minus 10% of the declared value for each declared nutrient at any point within the shelf life. That means nutrition testing should be repeated at the end of shelf life, not only on fresh product, especially for vitamins and other nutrients that degrade.