A food processing plant needs approvals from four directions: food safety from FSSAI or the state food safety commissioner, factory approvals from the state labour or factories authority, environmental consents from the State Pollution Control Board, and tax and enterprise registrations. The Food Safety and Standards Act, 2006 says no one may commence or carry on a food business except under a licence (or registration),[8] and the Licensing and Registration Regulations, 2011 set out how.[3]
The approvals have an order. Some must be in hand before construction starts, others before the first commercial batch, and a few continue for the life of the plant. Mapping them once, at the start, is cheaper than discovering a missing consent after the building is up.
| Approval | Authority | Needed before |
|---|---|---|
| GST and Udyam (MSME) registration | Tax and MSME authorities | Procurement and contracts |
| Site, plan and construction permission for the factory | State authority under the OSH Code rules; local body for building permission | Construction |
| Consent to Establish (CTE) | State Pollution Control Board | Construction |
| FSSAI registration, state licence or central licence | State licensing authority or FSSAI’s central licensing authority, via FoSCoS | Commercial production |
| Consent to Operate (CTO) | State Pollution Control Board | Production |
| Factory licence or registration under the OSH Code | Authority designated by the state | Production |
Table 1. One timeline for a plant’s approvals. Fire safety clearance and local building permission follow state and municipal rules.
Under the 2011 Regulations, businesses listed in Schedule 1 are licensed by the Central Licensing Authority and all others by the state or union territory licensing authority.[3] The Food Safety and Standards (Licensing and Registration of Food Businesses) Amendment Regulations, 2026, notified on 10 March 2026 (Gazette notification No. RCD-01002/1/2021-Regulatory-FSSAI-Part(1)), let the Food Authority set turnover thresholds and other categorisation criteria by order. FSSAI’s order of 13 March 2026 then replaced the old turnover limits with effect from 1 April 2026.[1]
| Category | Annual turnover from 1 April 2026 |
|---|---|
| FSSAI registration | Up to ₹1.5 crore |
| State licence | Above ₹1.5 crore and up to ₹50 crore |
| Central licence | Above ₹50 crore |
Table 2. FSSAI turnover bands under the order of 13 March 2026, which states that it supersedes earlier orders and regulations on turnover thresholds or criteria for categorisation.[1]
The bands apply to new licences and registrations from 1 April 2026. Existing businesses migrate on FoSCoS on self-declaration, without approval, fee or a change of licence number, and the jurisdiction of licensing authorities is unchanged. FSSAI expects more than 98% of food businesses to fall under state oversight.[2]
Selling in several states or exporting does not, by itself, put a plant in the central band: the declared turnover and the kind of business decide. Some categories are still licensed centrally whatever the turnover. For example, FSSAI’s 2020–2021 orders moved manufacturers of products under the nutraceutical regulations to central licences, as our guide to FSSAI nutraceutical regulations explains.[4] The March 2026 order does not list such categories, so confirm the band and kind of business on FoSCoS before filing.[5] Product approval for a non-specified food is a separate step, covered in our FSSAI product approval checklist.
The 2026 amendment also made licences and registrations perpetual: they stay valid unless suspended, cancelled or surrendered, and businesses no longer renew them. Fees can be paid for any number of years at once, and any licence issued on or after 1 April 2026 is perpetual.[2] Perpetual does not mean unchecked. The 2011 Regulations require the conditions of licence and the hygiene and sanitary requirements of Schedule 4 to be met at all times, and FSSAI’s new risk-based inspection framework uses compliance history, surveillance, self-testing and audits to decide how often a business is inspected.[3][2]
A licence application is made in Form B with the documents listed in Annexure 2 of Schedule 2. For a manufacturing unit these include a blueprint or layout plan with operation-wise areas, a list of equipment with numbers, installed capacity and horsepower, the food categories to be made, a chemical and bacteriological analysis of the water used as an ingredient from a recognised or public health laboratory, a food safety management system plan or certificate, a recall plan where applicable, and NOCs from the municipality or local body and the State Pollution Control Board except in a notified industrial area.[3] FoSCoS shows the current checklist for each kind of business.[5] Because the layout and equipment list describe the same plant as the factory plans and the pollution consent, prepare them once and keep them consistent.
Formulator’s note. Fix the product categories and capacity from the product plan before freezing the layout. They decide the FoSCoS kind of business, the water and testing requirements and, with turnover, the licence band.
The Occupational Safety, Health and Working Conditions Code, 2020 came into force on 21 November 2025 with the other three labour codes and replaces the Factories Act, 1948.[6][7] The Code provides for state rules on submitting factory plans, prior permission for the site and for construction or extension, and licensing, together with a common licence for a factory that can be applied for electronically.[7] The government said that during the transition the relevant provisions of the earlier labour Acts and their rules continue in force, so each state’s current rules decide the forms and sequence.[6]
Plan and site permission belong before construction; the factory licence or registration belongs before production. Fire safety clearance and building permission from the local body sit alongside. All of them describe the same layout, storage and boiler or refrigeration plant as the FSSAI file, so a layout change after approval can mean re-filing with several authorities at once.
Environmental clearance for a food plant comes as two consents from the pollution control board of the state where the plant stands, under the Water (Prevention and Control of Pollution) Act, 1974 and the Air (Prevention and Control of Pollution) Act, 1981. Consent to Establish (CTE) is taken before construction and Consent to Operate (CTO) before production. Together they confirm that effluent treatment, emissions and waste handling are designed and working as approved.
Each board has its own online forms, fees and document lists, and boards classify industries by pollution potential, which decides the consent route and how often consents are renewed. Expect to provide a process description, water source and consumption, effluent treatment arrangements and a site layout. Consents carry conditions on effluent quality, emissions and waste, and the operating team needs a renewal calendar as well as the first grant. The FSSAI licence application itself asks for the board’s NOC unless the plant is in a notified industrial area, so a delay at the board can hold up the food licence as well as construction.[3]
GST registration is needed for taxable supplies, and Udyam registration gives MSME recognition, which some lenders and state incentive schemes ask for. Packaged food also falls under legal metrology rules for packers. These are quick compared with the plant approvals, but they belong at the start because contracts, bank accounts and equipment purchases depend on them.
A licensed manufacturer must also be able to recall. The licence application asks for a recall plan with details of where the product is distributed, and the Food Safety and Standards (Food Recall Procedure) Regulations, 2017 set out how a recall is run.[3] Our article on how much a food recall costs shows why the plan deserves real effort, and food testing before launch covers the product evidence several licence steps assume.
| Step | When | Output |
|---|---|---|
| 1. Fix products, capacity and projected turnover | Concept stage | FSSAI band and FoSCoS kind of business[1][5] |
| 2. Register GST and Udyam | Before procurement | Tax and MSME numbers |
| 3. Apply for CTE and factory site and plan permission | Before construction | CTE; plan approval under state OSH rules |
| 4. Prepare the FSSAI file: layout, equipment, water report, FSMS plan, recall plan, NOCs | During construction | Form B application on FoSCoS[3] |
| 5. Obtain CTO and the factory licence; receive the FSSAI licence | Before the first commercial batch | Plant cleared to produce |
| 6. Run compliance: records, hygiene, consent renewals, inspections | Ongoing | Audit-ready plant |
Table 3. Licensing checklist for a new food processing plant.
An FSSAI central license is needed only above ₹50 crore turnover from 1 April 2026 (or for categories FSSAI licenses centrally), and most new plants will start in the state band. The licence is necessary but never sufficient: factory approvals under the OSH Code and state rules, the CTE and CTO sequence and tax registrations all sit on the critical path. Let the product plan and projected turnover decide the category, and plan the whole sequence before construction. The food processing industry in India overview shows where schemes and capacity are going, and our feasibility worked example puts these approvals on a project timeline.
Food Research Lab’s regulatory and scientific research team maps the FSSAI category, product approvals and label requirements for a new plant, from Chennai, India. FRL’s food and beverage registration and state licence support covers FSSAI filings.
Before you commit to a site, our techno-economic feasibility study covers raw material procurement and costing, machinery and processing costs, profit and loss, pricing, packaging and nutrition labelling, and our feasibility page lists layout designing, location feasibility, SOP and food safety management system development among the implementation steps we support. Our new food product development team fixes the product first, and testing is run or arranged through accredited partner laboratories. Contact us with your products, capacity and state.
It is a food business licence granted by FSSAI’s Central Licensing Authority rather than by a state licensing authority. From 1 April 2026 it applies to food businesses with annual turnover above ₹50 crore, and to categories FSSAI licenses centrally regardless of size. Applications are made in Form B through FoSCoS, with the documents listed in the 2011 Regulations.[1][3]
From 1 April 2026 turnover decides for most businesses: registration up to ₹1.5 crore, a state licence above ₹1.5 crore and up to ₹50 crore, and a central licence above ₹50 crore. Selling in several states or exporting does not by itself require a central licence, but some categories, such as nutraceutical manufacturers, are licensed centrally whatever their turnover.[1][4]
No. Under the 2026 amendment, licences and registrations have perpetual validity and stay valid unless suspended, cancelled or surrendered. Any licence issued on or after 1 April 2026 is perpetual. Businesses still pay fees, which can be paid for several years at once, and must keep meeting hygiene, safety and inspection requirements.[2]
Besides FSSAI registration or a licence, a food factory typically needs site, plan and licence approvals under the Occupational Safety, Health and Working Conditions Code, 2020 and state rules, consent to establish and consent to operate from the State Pollution Control Board, local building and fire clearances, and GST, Udyam and legal metrology registrations.[6][7]
Consent to Establish (CTE) and Consent to Operate (CTO) are issued by the State Pollution Control Board under the Water Act, 1974 and the Air Act, 1981. CTE is taken before construction and CTO before production. They confirm that effluent, emissions and waste handling meet the board’s conditions, and both carry conditions and renewal dates.
There is no single national timeline. Each authority and state works to its own process, and the approvals run partly in parallel: pollution and factory permissions before construction, the FSSAI licence, CTO and factory licence before production. Filing complete, consistent documents early and checking state rules shortens the path more than chasing any one approval.[3][6]